Cdc6 (also known as Cell division cycle 6 or Cdc18) functions as a regulator at the early stages of DNA replication, by helping to recruit and load the Minichromosome Maintenance Complex (MCM) onto DNA and may have additional roles in the control of mitotic entry. Precise duplication of chromosomal DNA is required for genomic stability during replication. Cdc6 has an essential role in DNA replication and irregular expression of Cdc6 may lead to genomic instability. Cdc6 over-expression is observed in many cancerous lesions. DNA replication begins when an origin recognition complex (ORC) binds to a replication origin site on the chromatin. Studies indicate that Cdc6 interacts with ORC through the Orc1 subunit, and that this association increases the specificity of the ORC-origins interaction. Further studies suggest that hydrolysis of Cdc6-bound ATP promotes the association of the replication licensing factor Cdt1 with origins through an interaction with Orc6 and this in turn promotes the loading of MCM2-7 helicase onto chromatin. The MCM2-7 complex promotes the unwinding of DNA origins, and the binding of additional factors to initiate the DNA replication. S-Cdk (S-phase cyclin and cyclin-dependent kinase complex) prevents rereplication by causing the Cdc6 protein to dissociate from ORC and prevents the Cdc6 and MCM proteins from reassembling at any origin. By phosphorylating Cdc6, S-Cdk also triggers Cdc6's ubiquitination. The Cdc6 protein is composed of three domains, an N-terminal AAA+ domain with Walker A and B, and Sensor-1 and -2 motifs. The central region contains a conserved nucleotide binding/ATPase domain and is a member of the ATPase superfamily. [, , , , ].The C-terminal domain of cell division control protein 6 (CDC6) assumes a winged helix fold, with a five α-helical bundle (α15-α19) structure, backed on one side by three beta strands (β6-β8). It has been shown that this domain acts as a DNA-localisation factor, however its exact function is, as yet, unknown. Putative functions include: (1) mediation of protein-protein interactions and (2) regulation of nucleotide binding and hydrolysis. Mutagenesis studies have shown that this domain is essential for appropriate CDC6 activity [].
This group represents the cell division control protein Cdc6 and Cdc18, which are essential initiation factors for DNA replication [].Cdc6 appears to have an important and perhaps unique dual role in S phase, it is first required for the initiation of DNA replication and then actively participates in the suppression of nuclear division. It interacts with the origin recognition complex (ORC). It targeted for degradation by the E3 ubiquitin ligase complex SCF (Cdc4) [, ].Cdc18 is part of the checkpoint control that prevents mitosis from occurring until S phase is completed. It plays a key role in coupling S phase to start and mitosis. It acts at the initiation of DNA replication and plays a major role in controlling the onset of S-phase. Together with orp1, it is involved in the maintenance of replication forks and activation of cds1-dependent S-phase checkpoint [, , , , ].
HUWE1 (also known as HECT, UBA and WWE domain-containing protein 1, or Mcl-1 ubiquitin ligase E3, amongst other names) may function as a ubiquitin-protein ligase involved in the ubiquitination cascade that targets specific substrate proteins in proteolysis. It can ubiquitylate DNA polymerase beta (Pol beta), the major BER DNA polymerase, and modulates base excision repair (BER) []. HUWE1 also acts as a critical mediator of both the p53-independent and p53-dependent tumor suppressor functions of ARF tumor suppressor in p53 regulation []. Moreover, HUWE1 is both required and sufficient for the polyubiquitination of Mcl-1, an anti-apoptotic Bcl-2 family member involved in DNA damage-induced apoptosis []. Furthermore, HUWE1 plays an important role in the regulation of Cdc6 stability after DNA damage. In addition, HUWE1 works as a partner of N-Myc oncoprotein in neural cells. It ubiquitinates N-Myc and primes it for proteasomal-mediated degradation [].HUWE1 contains a ubiquitin-associated (UBA) domain, a WWE domain, and a Bcl-2 homology region 3 (BH3) domain at the N terminus and a HECT domain at the C terminus. WWE domain plays a role in the regulation of specific protein-protein interactions in a ubiquitin conjugation system. BH3 domain is responsible for the specific binding to Mcl-1. HECT domain is involved in the inhibition of the transcriptional activity of p53 via a ubiquitin-dependent degradation pathway [].
DNA replication in eukaryotes results from a highly coordinated interaction between proteins, often as part of protein complexes, and the DNA template. One of the key early steps leading to DNA replication is formation of the pre-replication complex, or pre-RC. The pre-RC is formed by the sequential binding of the origin recognition complex (ORC), Cdc6 and Cdt1 proteins, and the MCM complex. Activation of the pre-RC into the initiation complex (IC) is achieved via the action of S-phase kinases, eventually leading to the loading of the replication machinery.Recently, a novel replication complex, GINS (for Go, Ichi, Nii, and San; five, one, two, and three in Japanese), has been identified [, ]. The precise function of GINS is not known. However, genetic and two-hybrid interactions indicate that it mediates the loading of the enzymatic replication machinery at a step after the action of the S-phase kinases []. Furthermore, GINS may be a part of the replication machinery itself, since it is found associated with replicating DNA [, ]. Electron microscopy of GINS shows that it forms a ring-like structure [], reminiscent of the structure of PCNA [], the DNA polymerase delta replication clamp. This observation, coupled with the observed interactions for GINS, indicates that the complex may represent the replication clamp for DNA polymerase epsilon [].The GINS complex is essential for initiation of DNA replication in Xenopus egg extracts []. This 100kDa stable complex includes Sld5, Psf1, Psf2, and Psf3. Homologues of these components are found also in other eukaryotes. This superfamily represents the Psf3 component.
Winged helix DNA-binding proteins share a related winged helix-turn-helix DNA-binding motif, where the "wings", or loops, are small β-sheets. The winged helix motif consists of two wings (W1, W2), three α-helices (H1, H2, H3) and three β-sheets (S1, S2, S3) arranged in the order H1-S1-H2-H3-S2-W1-S3-W2 []. The DNA-recognition helix makes sequence-specific DNA contacts with the major groove of DNA, while the wings make different DNA contacts, often with the minor groove or the backbone of DNA. Several winged-helix proteins display an exposed patch of hydrophobic residues thought to mediate protein-protein interactions.Many different proteins with diverse biological functions contain a winged helix DNA-binding domain, including transcriptional repressors such as biotin repressor, LexA repressor and the arginine repressor []; transcription factors such as the hepatocyte nuclear factor-3 proteins involved in cell differentiation, heat-shock transcription factor, and the general transcription factors TFIIE and TFIIF [, ]; helicases such as RuvB that promotes branch migration at the Holliday junction, and CDC6 in the pre-replication complex [, ]; endonucleases such as FokI and TnsA []; histones; and Mu transposase, where the flexible wing of the enhancer-binding domain is essential for efficient transposition [].
DNA replication in eukaryotes results from a highly coordinated interaction between proteins, often as part of protein complexes, and the DNA template. One of the key early steps leading to DNA replication is formation of the pre-replication complex, or pre-RC. The pre-RC is formed by the sequential binding of the origin recognition complex (ORC), Cdc6 and Cdt1 proteins, and the MCM complex. Activation of the pre-RC into the initiation complex (IC) is achieved via the action of S-phase kinases, eventually leading to the loading of the replication machinery.Recently, a novel replication complex, GINS (for Go, Ichi, Nii, and San; five, one, two, and three in Japanese), has been identified [, ]. The precise function of GINS is not known. However, genetic and two-hybrid interactions indicate that it mediates the loading of the enzymatic replication machinery at a step after the action of the S-phase kinases []. Furthermore, GINS may be a part of the replication machinery itself, since it is found associated with replicating DNA [, ]. Electron microscopy of GINS shows that it forms a ring-like structure [], reminiscent of the structure of PCNA [], the DNA polymerase delta replication clamp. This observation, coupled with the observed interactions for GINS, indicates that the complex may represent the replication clamp for DNA polymerase epsilon [].The GINS complex is essential for initiation of DNA replication in Xenopusegg extracts []. This 100kDa stable complex includes Sld5, Psf1, Psf2, and Psf3. Homologues of these components are found also in other eukaryotes. This family of proteins represents the Psf3 component.
DNA replication in eukaryotes results from a highly coordinated interaction between proteins, often as part of protein complexes, and the DNA template. One of the key early steps leading to DNA replication is formation of the prereplication complex, or pre-RC. The pre-RC is formed by the sequential binding of the origin recognition complex (ORC), Cdc6 and Cdt1 proteins, and the MCM complex. Activation of the pre-RC into the initiation complex (IC) is achieved via the action of S-phase kinases, eventually leading to the loading of the replication machinery.Recently, a novel replication complex, GINS (for Go, Ichi, Nii, and San; five, one, two, and three in Japanese), has been identified [, ]. The precise function of GINS is not known. However, genetic and two-hybrid interactions indicate that it mediates the loading of the enzymatic replication machinery at a step after the action of the S-phase kinases []. Furthermore, GINS may be a part of the replication machinery itself, since it is found associated with replicating DNA [, ]. Electron microscopy of GINS shows that it forms a ring-like structure [], reminiscent of the structure of PCNA [], the DNA polymerase delta replication clamp.This observation, coupled with the observed interactions for GINS, indicates that the complex may represent the replication clamp for DNA polymerase epsilon [].The GINS complex is essential for initiation of DNA replication in Xenopus egg extracts []. This 100kDa stable complex includes Sld5, Psf1, Psf2, and Psf3. Homologues of these components are found also in other eukaryotes. This family of proteins represents the Psf2 component.
DNA replication in eukaryotes results from a highly coordinated interaction between proteins, often as part of protein complexes, and the DNA template. One of the key early steps leading to DNA replication is formation of the prereplication complex, or pre-RC. The pre-RC is formed by the sequential binding of the origin recognition complex (ORC), Cdc6 and Cdt1 proteins, and the MCM complex. Activation of the pre-RC into the initiation complex (IC) is achieved via the action of S-phase kinases, eventually leading to the loading of the replication machinery.Recently, a novel replication complex, GINS (for Go, Ichi, Nii, and San; five, one, two, and three in Japanese), has been identified [, ]. The precise function of GINS is not known. However, genetic and two-hybrid interactions indicate that it mediates the loading of the enzymatic replication machinery at a step after the action of the S-phase kinases []. Furthermore, GINS may be a part of the replication machinery itself, since it is found associated with replicating DNA [, ]. Electron microscopy of GINS shows that it forms a ring-like structure [], reminiscent of the structure of PCNA [], the DNA polymerase delta replication clamp.This observation, coupled with the observed interactions for GINS, indicates that the complex may represent the replication clamp for DNA polymerase epsilon [].This family of proteins represents the PSF1 component (for partner of SLD five) of the GINS complex.
Precise duplication of chromosomal DNA is required for genomic stability during replication. A process called replication licensing ensures that chromosomes are replicated only once per cell cycle. To form a pre-replicative complex on replication origins in the G phase, ORC first binds origin DNA and triggers the binding of Cdc6 and Cdt1. These two factors recruit a putative replicative helicase and the MCM2-7. The MCM2-7 complex promotes the unwinding of DNA origins, and the binding of additional factors to initiate the DNA replication in S-phase. Cdt1 is present during G1 and early S phase of the cell cycle and degraded during the late S, G2, and M phases [, ].This entry represents Cdt1, which can be divided into three regions based on sequence comparison and biochemical analyses: the N-terminal region (Cdt1_n) binds DNA in a sequence-, strand-, and conformation-independent manner; the middle winged helix fold (Cdt1_m) binds geminin to inhibit both binding of the MCM complex to origins of replication and DNA; and the C-terminal region (Cdt1_c) is essential for Cdt1 activity and directly interacts with the MCM2-7 helicase. The winged helix fold structure of Cdt1_m is similar to the structures of Cdt1_c and other archaeal homologues of the eukaryotic replication initiator, without apparent sequence similarity [, ].
DNA replication in eukaryotes results from a highly coordinated interaction between proteins, often as part of protein complexes, and the DNA template. One of the key early steps leading to DNA replication is formation of the pre-replication complex, or pre-RC. The pre-RC is formed by the sequential binding of the origin recognition complex (ORC), Cdc6 and Cdt1 proteins, and the MCM complex. Activation of the pre-RC into the initiation complex (IC) is achieved via the action of S-phase kinases, eventually leading to the loading of the replication machinery.Recently, a novel replication complex, GINS (for Go, Ichi, Nii, and San; five, one, two, and three in Japanese), has been identified [, ]. The precise function of GINS is not known. However, genetic and two-hybrid interactions indicate that it mediates the loading of the enzymatic replication machinery at a step after the action of the S-phase kinases []. Furthermore, GINS may be a part of the replication machinery itself, since it is found associated with replicating DNA [, ]. Electron microscopy of GINS shows that it forms a ring-like structure [], reminiscent of the structure of PCNA [], the DNA polymerase delta replication clamp. This observation, coupled with the observed interactions for GINS, indicates that the complex may represent the replication clamp for DNA polymerase epsilon [].The GINS complex is essential for initiation of DNA replication in Xenopus egg extracts []. This 100kDa stable complex includes Sld5, Psf1, Psf2, and Psf3. Homologues of these components are found also in other eukaryotes []. The archaeal GINS complex contains two subunits (SSO0772/gins23 and SO1049/gins15 in Sulfolobus) that are poorly conserved homologues of the eukaryotic GINS subunits []. Only Gins23 is included in this entry.The eukaryotic GINS subunits are homologous. The four subunits of the complex consist of two domains each, termed the α-helical (A) and β-strand (B) domains. The A and B domains of Sld5/Psf1 are permuted with respect to Psf1/Psf3 [].
DNA replication in eukaryotes results from a highly coordinated interaction between proteins, often as part of protein complexes, and the DNA template. One of the key early steps leading to DNA replication is formation of the pre-replication complex, or pre-RC. The pre-RC is formed by the sequential binding of the origin recognition complex (ORC), Cdc6 and Cdt1 proteins, and the MCM complex. Activation of the pre-RC into the initiation complex (IC) is achieved via the action of S-phase kinases, eventually leading to the loading of the replication machinery.Recently, a novel replication complex, GINS (for Go, Ichi, Nii, and San; five, one, two, and three in Japanese), has been identified [, ]. The precise function of GINS is not known. However, genetic and two-hybrid interactions indicate that it mediates the loading of the enzymatic replication machinery at a step after the action of the S-phase kinases []. Furthermore, GINS may be a part of the replication machinery itself, since it is found associated with replicating DNA [, ]. Electron microscopy of GINS shows that it forms a ring-like structure [], reminiscent of the structure of PCNA [], the DNA polymerase delta replication clamp. This observation, coupled with the observed interactions for GINS, indicates that the complex may represent the replication clamp for DNA polymerase epsilon [].The GINS complex is essential for initiation of DNA replication in Xenopus egg extracts []. This 100kDa stable complex includes Sld5, Psf1, Psf2, and Psf3. Homologues of these components are found also in other eukaryotes []. The archaeal GINS complex contains two subunits (SSO0772/gins23 and SO1049/gins15 in Sulfolobus) that are poorly conserved homologues of the eukaryotic GINS subunits []. Only Gins23 is included in this entry.The eukaryotic GINS subunits are homologous. The four subunits of the complex consist of two domains each, termed the α-helical (A) and β-strand (B) domains. The A and B domains of Sld5/Psf1 are permuted with respect to Psf1/Psf3 [].
